MADE IN THE USA FOR OVER FOUR DECADES
- ROBOTOOLS ®
- TOOL REPAIR & PARTS SUPPLIER
- NEW / FEATURED PRODUCTS
- ROBOIMPACTS - Battery Powered Impact Wrenches
- HYDRAULIC Impact Wrenches
- ROBODRILLS - Rotary Drills
- BITS & SOCKETS
- HEX ADAPTERS, CHUCKS, BAGS etc.
- GROUND ROD DRIVERS
- TORQUE Limiters
- TERMINATION / COMPRESSION TOOLS & ACCESSORIES
- Burndy TooLs & Accessories
- Greenlee Tools
- Hilti Tools
- Wera Handtools
- DeWalt Tools
- Milwaukee Tools
- LEASE PROGRAM / Lifetime Warranty
- ROBOPAKS ®
- ROBOLIGHTS ®
- SPECIALTY PRODUCTS ®
Cable Preparation Kit
Electric Utility "CableReady" Kit
Cat. No. 7056
SPECIAL OFFER! This is the ultimate in cable preparation and the only kit you will need!
Kit contains:
.4 x 4 Cable End Stripper (Cat. No. V36000- 052) for 600v secondary cable;
.WS 64-UEM Adjustable Cable Stripper (Cat. No. V37295) for end stripping or mid span stripping of outer jackets or insulating material;
.BP 1A Adjustable Blade Banana Peeler (Cat. No. V34244) for strippable semi-con URD cable shield;
.WS 5A End Stripper (Cat. No. V37415) for 600v to 35 KV cables;
.PIT 1T Load Break Elbow Probe Insertion Tool with 125 in-lb torque delivery system (Cat. No. V35150) for 15 to 34.5 KV Elbow-small interface;
.IC 1 URD Insulation Chamfer (Cat. No. V34760) for .650 to 1.875 in. cable O.D. and 15 to 35 KV cable;
.6'' needle nose pliers and 10 ft. - 2" 120 grit and 10 ft. - 2" 320 grit Aluminum Oxide abrasive cloth.
These tools are protected and housed in a small, waterproof / crushproof case that can be easily stored and transported.
Need a cable preparation tool not listed, please call.
Related Items:
 |
> 4 X 4 Plus For 600 volt secondary cable. Cutting heads 500 MCM, 350 MCM, 4/0 & 2/0. Square cut. (Additional sizes and chamfer cut blades also available.) Bushings change easily with hex wrench. Length w/ bushings: 4.5 x 5 in. Weight: 14 oz.
Cat. No.
|
 |
> WS 64 U-EM Cable Stripper Universal tool for end stripping or mid span stripping of outer jacket or insulating material. Dual position adjustable jaw for cable sizes from 1/2" up to 2–1/2" cable O.D. Removes outer jacket on primary power cable. Ability to strip secondary or
|
 |
> WS 5A End Stripper Cat. No. V37415New adjustable strip stop with rotary mechanism eliminates the need for a hex wrench. New adjustable window, with inch strip and metric readings allow easy setting of stop for precise strip lengths. Strip lengths from
|
 |
> IC 1 Insulation Chamfer For .650 to 1.260 in. cable O.D. Chamfer 15 to 35 KV cable. Creates a 45° bevel, approximately .125 in. long. Operation takes 10 seconds or less. For XLPE insulations, works for Okonite and 3728 EP insulations. Tool Diameter: 3–1/2" Weight: 10
|
 |
> BP 1A Banana Peeler Cable O.D. range .750–1.250. (Additional sizes also available). Scoring depth from 1 to 90 mils. For Stripable semi–con URD cable shield. Spring–loaded blade assembly assure consistent scoring depth. Length: 9.4 in. Weight: 13 oz.
Cat. No. V34244
|
 |
> PIT Load Break Insert Tool For 15 to 35 KV elbow—small interface. Quick easy insertion of probe inside elbow. Prevents load break contamination and breakage. Delivers 125 in. lb. torque. Length: 9.375". Weight: 1 lb. 4 oz.
Cat. No. V35150
|
If you have more specific questions please contact us:
